From concept to product
nanoTRONIC is an engineering office with premises in Lyss and Zürich. We specialise in developing complete embedded systems and VHDL designs in a highly standardised environment. In addition, we can offer you advice, tests, reviews and extra personnel to cover shortages in your capacity. If you require any further information, do not hesitate to contact us.
Managing Director
ABOUT US
Background
nanoTRONIC AG was founded on 1st of August 2000 and opened its branch in Mägenwil in 2007 which was transferred to Zürich in 2021.
Environment
We care about the environment. Our Lyss office therefore only uses green electricity from a certified, regional source.
Bitte kontaktieren Sie uns unter folgender E-Mail Adresse bei Sales Fragen:
Bitte kontaktieren Sie uns unter folgender E-Mail Adresse bei Finance oder Administration Fragen:
Bitte kontaktieren Sie uns unter folgender E-Mail Adresse bei uElectronic Fragen:
Bitte kontaktieren Sie uns unter folgender E-Mail Adresse bei Software Fragen:
S-SADE
Solar Array Drive Electronics
The S-SADE is a 2 axis redundant drive electronics to be used with stepping motor-based actuators (mainly SADM), with the following characteristic:
Independent drive of both actuators
Bus Interface (MIL-STD-1553B)
High reliable
Full redundancy (cold)
Single Point Failure Free
Radiation hardness ≥ 100kRAD TID
Modularity
Interface Flexibility
Compact size
K-SADE
Solar Array Drive Electronics
The K-SADE is a 2 axis redundant drive electronics to be used with stepping motor-based actuators (mainly SADM), with the following characteristic:
Independent drive of both actuators
Commanded by commands (Frequency, Direction, On/Off)
High reliable
Full redundancy (cold)
Single Point Failure Free
Radiation hardness up to 100kRAD TID possible
Modularity
Compact size
C-SADE
Solar Array Drive Electronics
The C-SADE is a 2 axis redundant drive electronics to be used with stepping motor-based actuators (mainly SADM), with the following characteristic:
Independent drive of both actuators
Bus Interface (MIL-STD-1553B or CAN)
High reliable
Full redundancy (cold)
Single Point Failure Free
Radiation hardness 100kRAD TID
Modularity
Interface Flexibility
Compact size
Space Encoder System
Rotary / Linear Encoder for Space and Hi-rel Applications
The nanoTRONIC Space Encoder is a position encoder system for space and hi-rel applications. It is available in absolute and incremental variants to measure either rotary or linear positions:
System: Encoder scale, read head, optional interface electronics
Contactless position measurement with GMR effect (Giant Magnetoresistance)
Increased lifetime (compared to e.g. potentiometers)
Toothed wheel (or track) with teeth similar encoder scale
Magnetized pole rings or bars are possible
1 mm encoder pitch, 0.5 mm teeth
Different types of ferromagnetic steel can be used for the scale
STM32
nanoTRONIC’s STM32 Evaluation- and Prototyping-Board
Product features:
STM32F103RFT6, STM32F103RGT7
Individual Pin-Placement
Compatibility with nT SW-Framework
nT SW Framework
Platform independent software framework
Applications are implemented regardless of the platform used. This is based on the internal software framework, which abstracts all hardware and OS dependencies. This means that reusability and good testability are automatically integrated directly into the workflow.
STM32Fx, ATMEL SAM Vxx, SPARC, PowerPC, Windows, Linux
Sensitec Distributor
Distribution of Space Products
NanoTRONIC AG takes over the distribution of Sensitec products for the space sector worldwide. For product and price inquiries, please contact our sales department with the following email address:
System concepts
We prepare system concepts according to your design expectations and combine your idea with our experience in the development of microelectronics and automation. We guarantee that we will liaise closely with you in order to ensure that our concept satisfies your requirements.
Technology studies
Do you want to bring your product onto the market more quickly and at the right price?
In that case, use the right technology to develop it. We regard it as our job to look for technical solutions for you and to familiarise ourselves with innovations. That way, you can focus on your product, your R&D Department will become more efficient, and you will get your products onto the market more quickly, at the right price and with the latest technology.
Technology management
The correct choice of technology is all-important for getting your products onto the market quickly and cost-efficiently. We are committed to using the very latest technologies, keeping risks low.
Specification
In order to keep focused on the right objectives right from the start, it is important to write a clear specification. A considered specification saves time and money during subsequent phases of the project. We know from experience which points matter and will be happy to assist you in compiling a catalogue of requirements.
Implementation
Initial work on implementing the specification often begins in practice before the specification has been approved. The difficulty here is assessing which aspects to tackle straight away and which would be better left until the definitive specification has been approved. We will assist you in doing that.
PCB design
We will prepare the necessary diagrams, layouts and production documentation for the manufacture of your PCBs. During this process, we will take signal propagation times, signal levels, impedances and EMC aspects into consideration and adapt the PCB parameters accordingly.
We mainly work with the following programs:
- Altium Designer
- Mentor DxDesigner
- Mentor Xpedition PCB
- PADS Professional
If you wish, we can also convert your design into Cadence Design or OrCad.
We will also happily perform the production of your modules for you.
Prototyping
During prototyping, we will translate your specification into a proof of principle. We have a large number of eval boards for the processors and FPGAs, which are listed under “Competencies”, “Hardware design” and “SoC/FPGA/ASIC”. They enable us to implement your design requirements quickly.
Depending on the quantity planned, we will be happy to integrate your design further. The output during prototyping therefore ranges from an eval board, on which all the functions requested are implemented, through to a fully integrated solution which is geared towards your requirements.
If you wish to have the proof of principle integrated, we will develop a diagram and layout and oversee the configuration and soldering process. We can also configure smaller series in-house in our laboratory if packaging technologies permit.
Our competencies are put to full use during this phase.
Commissioning
If we have the configured the PCB here in-house, it will be commissioned.
All errors and changes that arise are documented in TRAC and are available for you to view at any time via WEB by entering your password. This will enable you to follow the progress of your design live. All the design-related documents are also always at your disposal.
Once all the specified functions are free from errors, the design is approved for verification.
Verification
Your design has been implemented, and the pilot series is awaiting approval. Thanks to the fact that the test specification is clearly defined during the specification phase, we are able to demonstrate all the properties specified by you using a representative test specimen.
This means that you can be sure that you will receive what you ordered.
Industrialisation
Taking a design through to series production following development is a decisive factor in the successful launch of the product. We will be happy to assist you here with our experience in testing, procuring materials and coordinating production.
We produce our own products completely in Switzerland and, where necessary, can also do so in cooperation with the Far East. We also act as suppliers for the car-manufacturing industry in this regard.
Thanks to our work in highly standardised sectors, we can also navigate our way around a regulated environment.
Testing
To keep the scrap rate low, you should leave nothing to chance. Validated manufacturing processes and statistically based random samples enable you to guarantee quality and, where necessary, to take corrective action in good time.
Materials procurement
Our experience in the procurement of electronic components will help you to choose the right suppliers. We know the right distributors and, if you wish, we can also contact the manufacturer directly on your behalf.
OUR COMPETENCIES
Competency overview. If you have specific questions, please contact us.
Our core competencies are System on Chip (SoC), FPGA and ASIC designs. With many years of sound expertise to rely on, we can integrate appropriate functions quickly and cost-efficiently.
Thanks to our many years of experience in the development of microelectronics, we can offer project management services for some or all aspects of projects. This entails support for in-house development or coordinating the cooperation with external partners. We are not limited here to the development of electronics; we will also happily organise all of the mechanical aspects, such as the assembly of your device.
Platform independent Software Framework
Applications are implemented regardless of the platform used. This is based on the internal software framework, which abstracts all hardware and OS dependencies. This means that reusability and good testability are automatically integrated directly into the workflow.
- STM32Fx
- ATMEL SAM Vxx
- SPARC
- PowerPC
- Windows
- Linux
Bare Metal Applications
- In the area of high reliability (typically space) we offer a lean and very stable implementation without a lot of OS overhead.
OS Applications and Drivers
- Platforms for embedded systems: freeRTOS, RTEMS
- PC: Windows, Linux
- Commissioning and Testing Tools
Programming languages & Tools:
- C, C++, Visual C++, Python, Perl, Bash scripting
- GIT, SVN, Trac, Bugzilla, Eclipse, GCC
- Continuous integration with Gitlab
- Unit testing
You can hand over the development of your entire product from concept to approval to us.
We would be happy to develop a partial product for you or support you in one of the development phases.
Our experience ranges from simple, inexpensive to complex products with high reliability, as required in medical devices or space applications.
We have already implemented designs with the following processors:
- ARM Cortex Family
- LEON3
- Xilinx Embedded Soft-Processor (Microblaze, Picoblaze)
- DSP Intel x86 Family
- Motorola 68XXX / MPC8xx Family
- IBM PowerPC
- Renesas M16C / M32C, o PIC 16Fxxx / 18Fxxx
- ATtiny-Family
We have already implemented the following bus protocols:
- I2C
- SPI
- CAN
- Ethernet
- USB
- VME
- PCI
- ISA
- Cardbus
- ETX
- MIL Bus 1553
- Spacewire
- IBIS
System on Chip (SoC), FPGA and ASIC designs are our core competencies. Thanks to in-depth know-how in this area, we can implement and test the suitable functions quickly and inexpensively. On request, we are also able to develop mixed signal ASICs in order to offer you the option of integrating the analog circuit components.
We have already implemented designs with the following FPGAs / SoC:
- ZYNQ from XILINX
- Virtex 6 from XILINX
- Virtex 4 from Xilinx
- Spartan 6 from XILINX
- Spartan 4 from XILINX
- ProASIC3 from Microsemi
- Cyclone EP1C3 from Intel
We have already programmed FPGAs / SoC with the following languages and tools:
- VHDL, Verilog
- Mentor HDL Author, Modelsim, Questasim
- Xilinx Tools (ISE, Vivado, EDK, PlanAhead, System Generator, ChipScope)
- Microsemi Libero IDE und SoC
- Sigasi Studio
The following processors have already been integrated:
- Microblaze
- ARM Cortex-A9
- PowerPC
- LEON3
EMC aspects are taken into account in every development phase, but especially in the concept phase. This enables us to implement your project within the allotted time and at the same time reduce the costs for achieving EMC approval. Thanks to many years of close cooperation with certified EMC companies, we can also take over the certification process for you.
In January 2015, our certified ISO 7 clean room was put into operation. We can now carry out assembly and soldering work as well as test and measurement processes in particular.
Cleanroom_Certificate (PDF, 3’147 KB)
In the increasingly complex environment of microelectronics, it is important to keep the overall system in mind when configuring the design. In many cases, problems can be identified and prevented in advance through a detailed system analysis. The complexity also becomes more manageable through a clear structuring of the function blocks and their interfaces. This applies between different electronic components as well as between mechanical and electronic components.
We would be happy to clarify for you which approval tests you need to carry out for your product. We accompany and support you with the certification of your product, advise you on any adjustments and, if necessary, carry them out for you.
OUR REFERENCES
Aerospace
FLIGHT HERITAGE
GPS-Satellites SADE (GPS, Galileo, Beidou)
LISA PATHFINDER
Front-end electronics: system engineering, coordination with ESA, PCB layout, test engineering, CE tests.
SADE METOP
Development of stepper motor activation for the thruster orientation mechanism.
Data acquisition card for the engine of the Sukoij Superjet 100:
Hardware/software development (control algorithm, DSO and uC), implementation and testing of the VHDL code for 2 CPLDs and 2 FPGAs, PCB layout and commissioning.
LUNA gas mass spectrometers
Sub-project management, system engineering, FPGA development and software development (2Gbit sample from ADC to FPGA, 20Gbit FPGA- internal processing).
CASSIS
Camera for exploring the surface of Mars: sub-project management, system engineering, FPGA development, software development.
MedTech
Hearing aids:
Support for the Development Team with new developments, both hardware and software.
Blood analysis devices:
Concept studies, specification, hardware/software engineering, FPGA development, laser diode driver, barcode reader and chip card reader, PCB layout, industrialisation
Pipettor:
Implementation of a 96-channel pipettor, interface with the TCP server which monitors the hardware via RS485.
Automotiv, Industrial, Telecom
Motor filter PCB:
Design, layout, commissioning, industrialisation, production (>5 millions units p.a.)
GPS track and trace module for an e-bike:
Hardware/software development, PCB layout, prototyping, production, industrialisation, EMC and CE testing, server connection via GSM/GPRS, Bluetooth interface implemented.
End of life ASIC replaced for a lift control system:
Reverse engineering, hardware/software development, PCB layout, production.
Development of HMI for fuel cells:
Hardware/software development, PCB layout, prototyping, production.
IP router for a VoIP solution:
ASIC development
OUR CERTIFICATES
An overview of our certifications and memberships.
OUR JOBS
Our vacancies at the moment.
To strengthen our quality team, we are looking for a passionate
Product and Quality Assurance Engineer (m/w/d)
nanoTRONIC AG is an innovative Swiss engineering company located in Lyss and Zürich Altstetten.
Specializing in highly regulated industries, we are providing development services to internationally oriented customers.
Our expertise spans sectors such as space, medical technology and railways. Our core competences include building ground support equipment and spacecraft subsystems for high-profile space missions.
We are achieving our goals working in interdisciplinary project teams who combine knowledge and experience on mechanics, electromechanics, electronics, microelectronics and software. Their activities benefit from close support by our quality and compliance department.
As a fast-growing successful company with currently 60+ employees, we are ready to tackle our clients’ demanding technical challenges.
Your responsibilities:
- Participation of continuous improvement of our Quality Management System
- Assess, monitor, and improve product quality throughout the requirements, design, development, and manufacturing phases of space electronics projects.
- Ensure compliance with industry standards, government regulations, and customer specific requirements for space electronics projects
- Plan and carry out internal and external audits
- All Product Assurance tasks required by our customers (incl. participation for meeting)
- Supporting of our engineering team for:
- Selection of materials and processes (incl. manufacturing process)
- Selection of electronic components
- Dependability analyses
- Management of the process for non-conformances
- Trainings especially for the behavior in our cleanrooms and ESD areas
- Carry out of incoming inspections and other inspections during integration, testing and final acceptance (KIP / MIP)
- Review of test reports and design documents with respect to quality requirements
- Composition of the required acceptance documentation (EIDP)
What you bring to the table:
- Master degree in electronic engineering or physics
- Several years of experience in quality management, ideally in space industry. Additional training as auditor and/or certified ESA inspector is an advantage
- Basical understanding of electronic circuits
- Quick comprehension and analytical thinking with independent working style
- Ability to find fast and target-oriented solutions
- Very good knowledge of English required. Knowledge of German and/or French is a plus
What we offer:
- Flexible working hours (40 hours per week).
- 24 days of paid annual leave.
- Good social benefits.
- A growing company where your impact matters.
- A flat hierarchy in an uncomplicated setting.
- Opportunity to apply your expertise to a wide range of challenges.
Teamwork is especially important to us. A large part of our success is based on interpersonal interaction for combining expertise from different disciplines. A varied, challenging but exciting range of tasks awaits you.
Apply today!
Send your complete application documents in PDF format to hr@nanotronic.ch.
Applications sent by recruitment agencies will not be considered.
Zur Verstärkung unseres Teams suchen wir ab sofort einen
IT System Administrator / IT Spezialist
IT, Standort Lyss oder Zürich Altstetten
nanoTRONIC ist ein innovatives Ingenieurbüro mit Hauptsitz in Lyss und einem Standort in Zürich Altstetten. Wir sind ein international tätiger Entwicklungsdienstleister und sind auf die Entwicklung von kompletten Embedded Systems und VHDL Designs im hochnormierten Umfeld spezialisiert. Unser 40 Köpfiges Team arbeitet in einem breiten Umfeld mit spezialisierter Technologie und entwickelt damit Hardware-, Software-, und Embedded-Lösungen auf dem Gebiet der Avionik, Medizinal- und Weltraumtechnik. Ebenso sind wir im Bereich Automotivindustrie und Bahntechnik tätig. Unser Kundenkreis erstreckt sich von der Kleinfirma bis zum multinationalen Grosskonzern.
Wir sind auf der Suche nach einem IT-Mitarbeiter, der sich für Technik begeistert und bereit ist Neues dazu zu lernen.
Als IT System Administrator sind Sie für folgende Hauptaufgaben verantwortlich:
- Betrieb, Unterhalt, Ausbau und Dokumentation unserer IT-Infrastruktur.
- IT Support für die Mitarbeiter.
Sie verfügen über folgende Qualifikationen:
- Informatiker/in EFZ oder ähnliche Ausbildung.
- Mehrjährige Erfahrung als Informatiker oder abgeschlossene Ausbildung zum Dipl. Techniker/in HF Informatik.
- Sicherer Umgang mit Linux und Erfahrung mit Virtualisierung (QEMU und LXC).
- Schnelle Auffassungsgabe und die Bereitschaft zur Einarbeitung in neue Themen.
- Kenntnisse in Netzwerktechnik & Sicherheit und Windows Server von Vorteil.
- Exaktes Arbeiten, selbstständige und gewissenhafte Arbeitsweise.
- Gute Deutsch- und grundsätzliche Englischkenntnisse (mündlich und schriftlich), Französischkenntnisse sind von Vorteil.
Unser Team ist uns sehr wichtig. Ein Grossteil unseres Erfolges basiert auf unserer interdisziplinären und kollegialen Zusammenarbeit. Dabei kommen uns unsere flachen Hierarchien und ein unkompliziertes Umfeld entgegen. Wir arbeiten in einem flexiblen Zeitmodell und bieten unseren Angestellten gute Sozialleistungen. Eine abwechslungsreiche Herausforderung mit stetig neuen Aufgaben und der Möglichkeit eigene Ideen ein zu bringen erwartet Sie.
Bewerben Sie sich heute!
Senden Sie Ihre kompletten Bewerbungsunterlagen im PDF-Format an hr@nanotronic.ch
To strengthen our development team, we are looking for a passionate
Senior System Engineer (100%)
nanoTRONIC AG is an innovative Swiss engineering company located in Lyss and Zürich Altstetten.
Specializing in highly regulated industries, we are providing development services to internationally oriented customers.
Our expertise spans sectors such as railways, medical technology and space. Our core competences include building ground support equipment and spacecraft subsystems for high-profile space missions.
We are achieving our goals working in interdisciplinary project teams who combine know-how and experience on mechanics, electronics, microelectronics and software. Their activities benefit from close support by our quality and compliance department.
As a fast-growing successful company with currently 60+ employees, we are ready to tackle our clients’ demanding technical challenges.
Your responsibilities:
- Lead technical projects.
- Plan the design, development and verification activities.
- Define and manage requirements in all project phases.
- Define system concepts in cooperation with our customers, based on their requirements.
- Define system architectures, specifications and interfaces.
- Prepare and maintain system level budgets (power, mass, etc.).
- Support the development process in all project phases from design to verification and validation.
- Ensure compliance with our high-quality standards.
- Contribute to technical documentation.
What you bring to the table:
- Engineering degree (BSc, MSc) in electrical/electronics engineering, software engineering or similar.
- Min. 6+ years of experience as a System Engineer for embedded systems.
- Good working knowledge of electronic, software and mechanical interfaces and related architectures.
- Quick comprehension, analytical skills, team spirit and a project oriented but self-dependent working style.
- Ability to find fast and target-oriented solutions.
- Working proficiency in English required. Knowledge of German and/or French is a plus.
- Experience in the space industry is a plus.
What we offer:
- Flexible working hours (40 hours per week).
- 24 days of paid annual leave.
- Good social benefits.
- A growing company where your impact matters.
- A flat hierarchy in an uncomplicated setting.
- Opportunity to apply your expertise to a wide range of challenges.
Teamwork is especially important to us. A large part of our success is based on interpersonal interaction for combining expertise from different disciplines. A varied, challenging but exciting range of tasks awaits you.
Apply today!
Send your complete application documents in PDF format to hr@nanotronic.ch.
As enforcement of our team and replacement due to upcoming retirement we are looking for a
Manager Quality Assurance (m/w/d)
Quality assurance, located in Lyss or Zürich Altstetten
nanoTRONIC is an innovative engineering company with main location in Lyss and a site in Zurich Altstetten. Our Team is working in a broad environment with high competence for the development of Hardware, Software and embedded solutions. Our products are widely used in space, avionic, medicine, automotive and rail. The range of our customers are from small companies up to multinational corporations.
We are looking for an experienced Quality Manager with sound experience in the ISO9000 series, as well as ESA standards ECSS with the focus on Product Assurance. You should be enthusiastic about highly specialized technology and appreciate the contact with international customers.
As Manager Quality Assurance you are responsible for the following main tasks:
- Continuous improvement of our Quality Assurance Management System and its adaptation to changes of the company organization
- Plan and carry out internal and external audits
- All Product Assurance tasks required by our customers
- Supporting of our engineering team for:
- Selection of materials and processes
- Selection of electronic components
- Reliabilty analyses
- Management of the process for non-conformances
- Trainings especially for the behavior in our clean rooms and ESD areas
- Carry out of inspections during integration, testing and final acceptance
- Review of test reports
- Composition of the required acceptance documentation
You bring the following qualifications:
- Master degree in physics, electronic engineering or similar technical area
- Several years of experience in quality management, ideally in space industry. Additional training as auditor and/or certified ESA inspector is an advantage
- Quick comprehension and analytical thinking with independent working style
- Ability to find fast and target-oriented solutions
- Very good knowledge of English and German (oral and written), knowledge of French is an advantage
- Willingness to work at our customer’s or supplier’s location in case of need
Our team is very important to us. A large part of our success is based on our interdisciplinary and collegial cooperation. The flat hierarchies and uncomplicated environment help us achieve this. We work with flexible time models and offer our employees attractive social benefits. A varied challenge with constantly new projects and clients awaits you.
Apply today and send your application letter in pdf format to hr@nanotronic.ch.
As a reinforcement for our team, we are looking for a
Senior Project Manager (m/w/d) 100%
Project Management, located in Lyss or Zürich Altstetten
nanoTRONIC is an innovative engineering company with its main location in Lyss and a site in Zurich Altstetten. We are an international Engineering Service provider, specializing in complete embedded systems and VHDL designs for high-reliable products. Our team works in a broad environment with high competence in the development of Hardware, Software, and embedded solutions. We make products that are widely used in space, avionic, medicine, automotive and rail, with customers ranging from small businesses to multinational corporations.
We are looking for an experienced Project Manager with sound experience in the leading of complex projects in the space industry. You should be enthusiastic about highly specialized technology and appreciate contact with international customers.
As Project Manager, you are responsible for the following main tasks:
- Commercial and overall project lead
- Responsible for concepts, planning and execution
- Management of customer requests and relationship
- Interface between customer, suppliers, and internal operations
- Negotiate with customers and suppliers
- Responsibility and accountability for budget, risk, and schedule within the project
- Management of large offers, from initial contact to release
You bring the following qualifications:
- Technical master’s degree
- Very good collaboration and project management skills, senior level
- At least 5 years of experience in the international space industry
- Ability to work in a dynamic environment
- Customer and solution oriented
- Enjoy challenges and like to go the extra mile
- Very good knowledge of English and German (oral and written)
Our team is very important to us. A large part of our success is based on our interdisciplinary and collegial cooperation. The flat hierarchies and uncomplicated environment help us to achieve this. We work with flexible time models and offer our employees attractive social benefits. A varied challenge with new projects and clients awaits you.
Apply today and send your application letter in pdf format to hr@nanotronic.ch.
Zur Verstärkung unseres Entwicklungsteams suchen wir ab sofort einen
Software-Gruppenleiter (m/w/d) 100%
Softwareentwicklung, Standort Lyss oder Zürich Altstetten
nanoTRONIC ist ein innovatives Ingenieurbüro mit Hauptsitz in Lyss und einem Standort in Zürich Altstetten. Wir sind ein international tätiger Entwicklungsdienstleister und sind auf die Entwicklung von kompletten Embedded Systems und VHDL Designs im hochnormierten Umfeld spezialisiert. Unser 50-köpfiges Team arbeitet in einem breiten Umfeld mit spezialisierter Technologie und entwickelt damit Hardware-, Software- und Embedded-Lösungen auf dem Gebiet der Avionik, Medizinal- und Weltraumtechnik, Automotivindustrie und Bahntechnik. Unser Kundenkreis erstreckt sich von der Kleinfirma bis zum multinationalen Grosskonzern.
Wir sind auf der Suche nach einem Software-Gruppenleiter mit einem Background als erfahrener Software-Entwickler, der sich für hochspezialisierte Technik begeistert und den Kontakt mit internationalen Kunden schätzt.
Als Software-Gruppenleiter sind Sie für folgende Hauptaufgaben verantwortlich:
- Administrative und technische Führung des Software-Entwicklungsteams
- Mitarbeit bei der Budgeterstellung
- Mitarbeit bei Konzepten und beim Systemdesign anhand von Spezifikationen, welche zusammen mit den Kunden erarbeitet werden.
- Design der Softwarearchitektur zusammen mit dem Product Management
- Durchführung von Reviews
- Technischer Support des Software-Entwicklungsteams
- Verantwortung für den SW Prozess
- Sicherstellung unserer hohen Qualitätsanforderungen unter Einsatz von Testframeworks.
- Erstellen von Dokumentationen in Deutsch und Englisch.
Sie verfügen über folgende Qualifikationen:
- FH/ETH Abschluss auf dem Gebiet Embedded Software oder Elektrotechnik mit Vertiefung Software.
- Eine betriebswirtschaftliche Weiterbildung ist von Vorteil
- Führungserfahrung
- Erfahrung in der Erstellung von SW Architektur
- Fähigkeit, modulare und zielgerichtete Lösungen zu finden.
- Analytische Denk- und selbständige Arbeitsweise.
- Sehr gute Kenntnisse im Bereich der hardwarenahen Softwareentwicklung in C/C++.
- Erfahrungen mit gängigen Entwicklungstools und Softwareprozessen ist von Vorteil (IDE/Toolchain/Continuous Integration/Unit Testing).
- Mehrjährige Erfahrung in der Entwicklung von Software im Bereich Embedded Software.
- Gute Deutsch- und Englischkenntnisse (mündlich und schriftlich), Französischkenntnisse von Vorteil.
Unser Team ist uns sehr wichtig. Ein Grossteil unseres Erfolges basiert auf unserer interdisziplinären und kollegialen Zusammenarbeit. Dabei kommen uns unsere flachen Hierarchien und ein unkompliziertes Umfeld entgegen. Wir arbeiten in einem flexiblen Zeitmodell und bieten unseren Angestellten gute Sozialleistungen. Eine abwechslungsreiche Herausforderung mit stetig neuen Projekten und Kunden erwartet Sie.
Bewerben Sie sich heute und senden Sie Ihre kompletten Bewerbungsunterlagen im PDF-Format an hr@nanotronic.ch.
Zur Verstärkung unseres Teams suchen wir ab sofort einen
Layouter: Elektroniker / Techniker HF (m/w/d)
Hardware Entwicklung, Standort Lyss oder Zürich Altstetten
nanoTRONIC ist ein innovatives Ingenieurbüro mit Hauptsitz in Lyss und einem Standort in Zürich Altstetten. Wir sind ein international tätiger Entwicklungsdienstleister und sind auf die Entwicklung von kompletten Embedded Systems und VHDL Designs im hochnormierten Umfeld spezialisiert. Unser 50-köpfiges Team arbeitet in einem breiten Umfeld mit spezialisierter Technologie und entwickelt damit Hardware-, Software-, und Embedded-Lösungen auf den Gebieten der Avionik, Medizinal- und Weltraumtechnik. Ebenso sind wir in den Bereichen Automotivindustrie und Bahntechnik tätig. Unser Kundenkreis erstreckt sich von der Kleinfirma bis zum multinationalen Grosskonzern.
Wir sind auf der Suche nach einem erfahrenen Layouter, der sich für komplexe CAD begeistert und den Kontakt mit internationalen Kunden schätzt.
Als Layouter sind Sie für folgende Hauptaufgaben verantwortlich:
- Erstellen von Schemas gemäss Vorgabe mit DxDesigner/PADS von Mentor Graphics und Altium Design.
- Layouten von PCBs mit Xpedition von Mentor Graphics und Altium Design.
- Platinen bis zu 16 Lagen.
- High-Speed Designs (USB3, FPGA, usw.).
- HF Designs (2,4/5 GHz, LBT, usw.).
- Stark miniaturisierte Designs.
- EMV kritische Anwendungen.
- Mitarbeit in der Entwicklung.
Ihr Profil:
- Abgeschlossene Lehre als Elektroniker.
- Allenfalls eine weitergehende Ausbildung als Techniker HF.
- Erfahrungen im Bereich PCB-Layout.
- Exaktes arbeiten und selbstständige Arbeitsweise.
- Gute handwerkliche Fähigkeiten (Löten, mechanische Bearbeitung) sind von Vorteil.
- Gute Deutsch- und grundsätzliche Englischkenntnisse (mündlich und schriftlich), Französischkenntnisse von Vorteil.
Unser Team ist uns sehr wichtig. Ein Grossteil unseres Erfolges basiert auf unserer interdisziplinären und kollegialen Zusammenarbeit. Dabei kommen uns unsere flachen Hierarchien und ein unkompliziertes Umfeld entgegen. Wir arbeiten in einem flexiblen Zeitmodell und bieten unseren Angestellten gute Sozialleistungen. Eine abwechslungsreiche Herausforderung mit stetig neuen Projekten erwartet Sie.
Bewerben Sie sich heute!
Senden Sie Ihre kompletten Bewerbungsunterlagen im PDF-Format an hr@nanotronic.ch.
OUR CONTACTS
Departments
nanoTRONIC AG
Werkstrasse 27
CH – 3250 Lyss
E-mail:info@nanotronic.ch
Telefon: +41 32 384 69 30
Fax: +41 32 384 69 31
nanoTRONIC AG
Herostrasse 9
CH – 8048 Zürich
E-mail:info@nanotronic.ch
Telefon: +41 32 384 69 30
Fax: +41 32 384 69 31